# Bambu Lab Support For PLA/PETG print settings (nozzle, bed, dry)

Print at 190–240 °C (374–464 °F) nozzle, 35–60 °C (95–140 °F) bed. Dry 8 h at 75 °C (167 °F) if it's been open. Listed speed up to 100 mm/s.

Those settings follow the Bambu Lab Support for PLA/PETG technical data sheet. Where an older database figure disagrees, the note is under Sources & notes.

## Sources & notes

Bambu Lab Support For PLA/PETG (PVA) lists 190–240 °C (374–464 °F) nozzle and 35–60 °C (95–140 °F) bed, from Bambu Lab Support For PLA/PETG technical data sheet (https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_Support_for_PLA_PETG_Technical_Data_Sheet.pdf?v=1721103305), checked 2026-10-14.

Dataset imported: 2026-10-13. Open Filament Database generation date, not a lab test.

- Material: PVA
- Nozzle: 190–240 °C (374–464 °F)
- Bed: 35–60 °C (95–140 °F)
- Dry: 75 °C (167 °F) for 8 h
- Print speed: up to 100 mm/s
- Hardened nozzle: not recorded
- Source: https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_Support_for_PLA_PETG_Technical_Data_Sheet.pdf?v=1721103305

## What nozzle temperature does Bambu Lab Support For PLA/PETG recommend?

Bambu Lab Support For PLA/PETG lists a recommended nozzle temperature of 190–240 °C (374–464 °F) on the manufacturer technical data sheet.

## What bed temperature does Bambu Lab Support For PLA/PETG recommend?

Bambu Lab Support For PLA/PETG lists a recommended bed temperature of 35–60 °C (95–140 °F) on the manufacturer technical data sheet.

## What print speed does Bambu Lab Support For PLA/PETG list?

Bambu Lab Support For PLA/PETG lists a print speed up to 100 mm/s on the manufacturer technical data sheet. Volumetric flow is not on that sheet.

## Does Bambu Lab Support For PLA/PETG require an enclosure?

An enclosure requirement is not in our current sources. No chamber temperature is listed either.

## Does Bambu Lab Support For PLA/PETG require a hardened nozzle?

A hardened-nozzle requirement is not in our current sources.

## How should Bambu Lab Support For PLA/PETG be dried?

Dry Bambu Lab Support For PLA/PETG for 8 h at 75 °C (167 °F), from the manufacturer technical data sheet.

## What spool weights does Bambu Lab Support For PLA/PETG come in?

Listed spool weights: 500 g.

## What is the price per kilogram of Bambu Lab Support For PLA/PETG?

Price per kilogram is not in our current sources.