{
  "slug": "recyclingfabrik",
  "name": "RecyclingFabrik",
  "website": "https://recyclingfabrik.com",
  "origin": "DE",
  "priority": false,
  "ofdSlug": "recyclingfabrik",
  "filaments": [
    {
      "slug": "petg",
      "brand": "RecyclingFabrik",
      "brandSlug": "recyclingfabrik",
      "product": "PETG",
      "material": "PETG",
      "materialSlug": "petg",
      "materialLabel": "PETG",
      "nozzleTempC": {
        "min": 220,
        "max": 250,
        "singleValue": false
      },
      "bedTempC": {
        "min": 70,
        "max": 90,
        "singleValue": false
      },
      "speeds": {
        "printMmS": {
          "min": null,
          "max": null
        },
        "volumetricMm3S": {
          "min": null,
          "max": null
        }
      },
      "drying": {
        "maxTempC": null,
        "hours": null,
        "source": null
      },
      "enclosure": {
        "required": null,
        "chamberTempC": {
          "min": null,
          "ideal": null,
          "max": null
        }
      },
      "hardenedNozzle": null,
      "hardenedNozzleBasis": null,
      "traits": {
        "variantCount": 11,
        "abrasiveVariants": 0,
        "carbonFiberVariants": 0,
        "glassFiberVariants": 0
      },
      "spoolWeightsG": [
        1000
      ],
      "emptySpoolWeightsG": [],
      "diametersMm": [
        1.75
      ],
      "densityGCm3": 1.27,
      "diameterToleranceMm": 0.02,
      "minNozzleDiameterMm": null,
      "shoreHardnessA": null,
      "certifications": [],
      "colors": [
        {
          "name": "Bloody Orange (Red Orange)",
          "hex": "#E03F26",
          "discontinued": false
        },
        {
          "name": "Caribbean Sea (Blue)",
          "hex": "#005DA4",
          "discontinued": false
        },
        {
          "name": "Curved Banana (Yellow)",
          "hex": "#F5E457",
          "discontinued": false
        },
        {
          "name": "Dancing Flame (Orange-Transparent)",
          "hex": "#E03F26",
          "discontinued": false
        },
        {
          "name": "Frosty Rose (Pink-Transparent)",
          "hex": "#C80181",
          "discontinued": false
        },
        {
          "name": "Frothy Cappuccino (Beige)",
          "hex": "#C3C199",
          "discontinued": false
        },
        {
          "name": "Good Night (Black)",
          "hex": "#000000",
          "discontinued": false
        },
        {
          "name": "Mystical Emerald (Green-Transparent)",
          "hex": "#217165",
          "discontinued": false
        },
        {
          "name": "Royal Amethyst (Violet-Transparent)",
          "hex": "#492972",
          "discontinued": false
        },
        {
          "name": "Sour Apple (Green)",
          "hex": "#95D05C",
          "discontinued": false
        },
        {
          "name": "Whole Carrot (Orange)",
          "hex": "#FF7A33",
          "discontinued": false
        }
      ],
      "colorCount": 11,
      "discontinued": false,
      "pricePerKg": null,
      "priceCurrency": null,
      "sourceUrl": "https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PETG/filaments/petg/index.json",
      "datasheetUrl": null,
      "safetySheetUrl": null,
      "brandWebsite": "https://recyclingfabrik.com",
      "verifiedDate": "2026-10-13",
      "fieldSources": {
        "nozzleTempC": "open-filament-database",
        "bedTempC": "open-filament-database"
      },
      "provenance": [
        {
          "source": "Open Filament Database",
          "license": "MIT",
          "repository": "https://github.com/SimplyPrint/open-filament-database",
          "canonicalRepository": "https://github.com/OpenFilamentCollective/open-filament-database",
          "maintainer": "Open Filament Collective, facilitated by SimplyPrint",
          "dumpVersion": "2026.10.13",
          "generatedAt": "2026-10-13T03:01:57Z",
          "recordUrl": "https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PETG/filaments/petg/index.json",
          "fields": [
            "bedTempC",
            "brand",
            "colors",
            "densityGCm3",
            "diameterToleranceMm",
            "diametersMm",
            "material",
            "nozzleTempC",
            "product",
            "spoolWeightsG"
          ]
        }
      ],
      "ofd": {
        "brandSlug": "recyclingfabrik",
        "material": "PETG",
        "filamentSlug": "petg",
        "uuid": "953b14f7-01d3-443c-9fb9-f8fbd42eb3fa"
      },
      "spoolman": null,
      "citation": "RecyclingFabrik PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PETG/filaments/petg/index.json; dataset imported 2026-10-13).",
      "faq": [
        {
          "q": "What nozzle temperature does RecyclingFabrik PETG recommend?",
          "a": "RecyclingFabrik PETG lists a recommended nozzle temperature of 220–250 °C."
        },
        {
          "q": "What bed temperature does RecyclingFabrik PETG recommend?",
          "a": "RecyclingFabrik PETG lists a recommended bed temperature of 70–90 °C."
        },
        {
          "q": "What print speed does RecyclingFabrik PETG list?",
          "a": "Print speed and volumetric flow are not in our current sources in the imported sources."
        },
        {
          "q": "Does RecyclingFabrik PETG require an enclosure?",
          "a": "An enclosure requirement is not in our current sources. No chamber temperature is listed either."
        },
        {
          "q": "Does RecyclingFabrik PETG require a hardened nozzle?",
          "a": "A hardened-nozzle requirement is not in our current sources."
        },
        {
          "q": "How should RecyclingFabrik PETG be dried?",
          "a": "Drying temperature and drying time for RecyclingFabrik PETG are not in our current sources."
        },
        {
          "q": "What spool weights does RecyclingFabrik PETG come in?",
          "a": "Listed spool weights: 1 kg (1000 g)."
        },
        {
          "q": "What is the price per kilogram of RecyclingFabrik PETG?",
          "a": "Price per kilogram is not in our current sources."
        }
      ],
      "missing": [
        "speeds.printMmS",
        "speeds.volumetricMm3S",
        "drying",
        "enclosure",
        "hardenedNozzle",
        "pricePerKg"
      ],
      "brandPriority": false
    },
    {
      "slug": "matte-pla",
      "brand": "RecyclingFabrik",
      "brandSlug": "recyclingfabrik",
      "product": "Matte PLA",
      "material": "PLA",
      "materialSlug": "pla",
      "materialLabel": "PLA",
      "nozzleTempC": {
        "min": 190,
        "max": 230,
        "singleValue": false
      },
      "bedTempC": {
        "min": 50,
        "max": 70,
        "singleValue": false
      },
      "speeds": {
        "printMmS": {
          "min": null,
          "max": null
        },
        "volumetricMm3S": {
          "min": null,
          "max": null
        }
      },
      "drying": {
        "maxTempC": null,
        "hours": null,
        "source": null
      },
      "enclosure": {
        "required": null,
        "chamberTempC": {
          "min": null,
          "ideal": null,
          "max": null
        }
      },
      "hardenedNozzle": null,
      "hardenedNozzleBasis": null,
      "traits": {
        "variantCount": 1,
        "abrasiveVariants": 0,
        "carbonFiberVariants": 0,
        "glassFiberVariants": 0
      },
      "spoolWeightsG": [
        1000
      ],
      "emptySpoolWeightsG": [],
      "diametersMm": [
        1.75
      ],
      "densityGCm3": 1.24,
      "diameterToleranceMm": 0.02,
      "minNozzleDiameterMm": null,
      "shoreHardnessA": null,
      "certifications": [],
      "colors": [
        {
          "name": "Misty Night (Black-Satin )",
          "hex": "#000000",
          "discontinued": false
        }
      ],
      "colorCount": 1,
      "discontinued": false,
      "pricePerKg": null,
      "priceCurrency": null,
      "sourceUrl": "https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/matte_pla/index.json",
      "datasheetUrl": null,
      "safetySheetUrl": null,
      "brandWebsite": "https://recyclingfabrik.com",
      "verifiedDate": "2026-10-13",
      "fieldSources": {
        "nozzleTempC": "open-filament-database",
        "bedTempC": "open-filament-database"
      },
      "provenance": [
        {
          "source": "Open Filament Database",
          "license": "MIT",
          "repository": "https://github.com/SimplyPrint/open-filament-database",
          "canonicalRepository": "https://github.com/OpenFilamentCollective/open-filament-database",
          "maintainer": "Open Filament Collective, facilitated by SimplyPrint",
          "dumpVersion": "2026.10.13",
          "generatedAt": "2026-10-13T03:01:57Z",
          "recordUrl": "https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/matte_pla/index.json",
          "fields": [
            "bedTempC",
            "brand",
            "colors",
            "densityGCm3",
            "diameterToleranceMm",
            "diametersMm",
            "material",
            "nozzleTempC",
            "product",
            "spoolWeightsG"
          ]
        }
      ],
      "ofd": {
        "brandSlug": "recyclingfabrik",
        "material": "PLA",
        "filamentSlug": "matte_pla",
        "uuid": "5f99aaf2-0a1b-4f81-ac99-08c4591b05f7"
      },
      "spoolman": null,
      "citation": "RecyclingFabrik Matte PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/matte_pla/index.json; dataset imported 2026-10-13).",
      "faq": [
        {
          "q": "What nozzle temperature does RecyclingFabrik Matte PLA recommend?",
          "a": "RecyclingFabrik Matte PLA lists a recommended nozzle temperature of 190–230 °C."
        },
        {
          "q": "What bed temperature does RecyclingFabrik Matte PLA recommend?",
          "a": "RecyclingFabrik Matte PLA lists a recommended bed temperature of 50–70 °C."
        },
        {
          "q": "What print speed does RecyclingFabrik Matte PLA list?",
          "a": "Print speed and volumetric flow are not in our current sources in the imported sources."
        },
        {
          "q": "Does RecyclingFabrik Matte PLA require an enclosure?",
          "a": "An enclosure requirement is not in our current sources. No chamber temperature is listed either."
        },
        {
          "q": "Does RecyclingFabrik Matte PLA require a hardened nozzle?",
          "a": "A hardened-nozzle requirement is not in our current sources."
        },
        {
          "q": "How should RecyclingFabrik Matte PLA be dried?",
          "a": "Drying temperature and drying time for RecyclingFabrik Matte PLA are not in our current sources."
        },
        {
          "q": "What spool weights does RecyclingFabrik Matte PLA come in?",
          "a": "Listed spool weights: 1 kg (1000 g)."
        },
        {
          "q": "What is the price per kilogram of RecyclingFabrik Matte PLA?",
          "a": "Price per kilogram is not in our current sources."
        }
      ],
      "missing": [
        "speeds.printMmS",
        "speeds.volumetricMm3S",
        "drying",
        "enclosure",
        "hardenedNozzle",
        "pricePerKg"
      ],
      "brandPriority": false
    },
    {
      "slug": "pla",
      "brand": "RecyclingFabrik",
      "brandSlug": "recyclingfabrik",
      "product": "PLA",
      "material": "PLA",
      "materialSlug": "pla",
      "materialLabel": "PLA",
      "nozzleTempC": {
        "min": 190,
        "max": 230,
        "singleValue": false
      },
      "bedTempC": {
        "min": 50,
        "max": 70,
        "singleValue": false
      },
      "speeds": {
        "printMmS": {
          "min": null,
          "max": null
        },
        "volumetricMm3S": {
          "min": null,
          "max": null
        }
      },
      "drying": {
        "maxTempC": null,
        "hours": null,
        "source": null
      },
      "enclosure": {
        "required": null,
        "chamberTempC": {
          "min": null,
          "ideal": null,
          "max": null
        }
      },
      "hardenedNozzle": null,
      "hardenedNozzleBasis": null,
      "traits": {
        "variantCount": 35,
        "abrasiveVariants": 0,
        "carbonFiberVariants": 0,
        "glassFiberVariants": 0
      },
      "spoolWeightsG": [
        1000
      ],
      "emptySpoolWeightsG": [],
      "diametersMm": [
        1.75
      ],
      "densityGCm3": 1.24,
      "diameterToleranceMm": 0.02,
      "minNozzleDiameterMm": null,
      "shoreHardnessA": null,
      "certifications": [],
      "colors": [
        {
          "name": "Calming Lavender (Violet)",
          "hex": "#8D5984",
          "discontinued": false
        },
        {
          "name": "Cooling Lemon (Yellow)",
          "hex": "#F5E457",
          "discontinued": false
        },
        {
          "name": "Creamy Coffee (Beige)",
          "hex": "#D4B6A3",
          "discontinued": false
        },
        {
          "name": "Dark Ivy",
          "hex": "#214327",
          "discontinued": false
        },
        {
          "name": "Deep Ocean (Dark Blue)",
          "hex": "#34695A",
          "discontinued": false
        },
        {
          "name": "Delicate Peach (Orange)",
          "hex": "#F6A25C",
          "discontinued": false
        },
        {
          "name": "Falling Leaves (Brown)",
          "hex": "#6E4325",
          "discontinued": false
        },
        {
          "name": "Flottes Veilchen (purple)",
          "hex": "#E8BEDD",
          "discontinued": false
        },
        {
          "name": "Fluffy Sheep (White)",
          "hex": "#FFFFFF",
          "discontinued": false
        },
        {
          "name": "Fresh Meadow (Light Green)",
          "hex": "#9DBD8B",
          "discontinued": false
        },
        {
          "name": "Gentle Blossom (Pink)",
          "hex": "#FC6D8E",
          "discontinued": false
        },
        {
          "name": "Liquid Asphalt (Dark Gray)",
          "hex": "#63646B",
          "discontinued": false
        },
        {
          "name": "Mild Sea Buckthorn (Orange)",
          "hex": "#F67405",
          "discontinued": false
        },
        {
          "name": "Milky Glass (Transparent)",
          "hex": "#F0EBE5",
          "discontinued": false
        },
        {
          "name": "RAL 3000 Fire Red",
          "hex": "#C01616",
          "discontinued": false
        },
        {
          "name": "RAL 3001 Signal Red",
          "hex": "#AC1A17",
          "discontinued": false
        },
        {
          "name": "Rotten Avocado (Green)",
          "hex": "#606935",
          "discontinued": false
        },
        {
          "name": "Shallow Breeze (Light Blue)",
          "hex": "#9DB6D4",
          "discontinued": false
        },
        {
          "name": "Shallow water (blue)",
          "hex": "#23668C",
          "discontinued": false
        },
        {
          "name": "Shimmering Candle",
          "hex": "#8A2D40",
          "discontinued": false
        },
        {
          "name": "Shimmering Crown",
          "hex": "#9A8524",
          "discontinued": false
        },
        {
          "name": "Shimmering fir tree",
          "hex": "#4C645B",
          "discontinued": false
        },
        {
          "name": "Shimmering Night",
          "hex": "#000000",
          "discontinued": false
        },
        {
          "name": "Shimmering Pearl",
          "hex": "#1E606C",
          "discontinued": false
        },
        {
          "name": "Shimmering Plum",
          "hex": "#A38496",
          "discontinued": false
        },
        {
          "name": "Shimmering Statue",
          "hex": "#613B3A",
          "discontinued": false
        },
        {
          "name": "Shimmering Sword",
          "hex": "#6A6C6E",
          "discontinued": false
        },
        {
          "name": "Sleepy Koala (Gray)",
          "hex": "#808080",
          "discontinued": false
        },
        {
          "name": "Smart Mouse (Light Gray)",
          "hex": "#AFAEAB",
          "discontinued": false
        },
        {
          "name": "Sparkling Fir (Green Glitter)",
          "hex": "#AA0101",
          "discontinued": false
        },
        {
          "name": "Sparkling Night (Black Glitter)",
          "hex": "#000000",
          "discontinued": false
        },
        {
          "name": "Special Rainbow",
          "hex": "#436176",
          "discontinued": false
        },
        {
          "name": "Squeezed lime (light green)",
          "hex": "#7AB352",
          "discontinued": false
        },
        {
          "name": "Sweet Cherry (Red)",
          "hex": "#C60F3E",
          "discontinued": false
        },
        {
          "name": "Wet Elephant (Gray)",
          "hex": "#697272",
          "discontinued": false
        }
      ],
      "colorCount": 35,
      "discontinued": false,
      "pricePerKg": null,
      "priceCurrency": null,
      "sourceUrl": "https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/pla/index.json",
      "datasheetUrl": null,
      "safetySheetUrl": null,
      "brandWebsite": "https://recyclingfabrik.com",
      "verifiedDate": "2026-10-13",
      "fieldSources": {
        "nozzleTempC": "open-filament-database",
        "bedTempC": "open-filament-database"
      },
      "provenance": [
        {
          "source": "Open Filament Database",
          "license": "MIT",
          "repository": "https://github.com/SimplyPrint/open-filament-database",
          "canonicalRepository": "https://github.com/OpenFilamentCollective/open-filament-database",
          "maintainer": "Open Filament Collective, facilitated by SimplyPrint",
          "dumpVersion": "2026.10.13",
          "generatedAt": "2026-10-13T03:01:57Z",
          "recordUrl": "https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/pla/index.json",
          "fields": [
            "bedTempC",
            "brand",
            "colors",
            "densityGCm3",
            "diameterToleranceMm",
            "diametersMm",
            "material",
            "nozzleTempC",
            "product",
            "spoolWeightsG"
          ]
        }
      ],
      "ofd": {
        "brandSlug": "recyclingfabrik",
        "material": "PLA",
        "filamentSlug": "pla",
        "uuid": "0a82b443-31a4-4fa7-a919-1bf3a6e29cb6"
      },
      "spoolman": null,
      "citation": "RecyclingFabrik PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/pla/index.json; dataset imported 2026-10-13).",
      "faq": [
        {
          "q": "What nozzle temperature does RecyclingFabrik PLA recommend?",
          "a": "RecyclingFabrik PLA lists a recommended nozzle temperature of 190–230 °C."
        },
        {
          "q": "What bed temperature does RecyclingFabrik PLA recommend?",
          "a": "RecyclingFabrik PLA lists a recommended bed temperature of 50–70 °C."
        },
        {
          "q": "What print speed does RecyclingFabrik PLA list?",
          "a": "Print speed and volumetric flow are not in our current sources in the imported sources."
        },
        {
          "q": "Does RecyclingFabrik PLA require an enclosure?",
          "a": "An enclosure requirement is not in our current sources. No chamber temperature is listed either."
        },
        {
          "q": "Does RecyclingFabrik PLA require a hardened nozzle?",
          "a": "A hardened-nozzle requirement is not in our current sources."
        },
        {
          "q": "How should RecyclingFabrik PLA be dried?",
          "a": "Drying temperature and drying time for RecyclingFabrik PLA are not in our current sources."
        },
        {
          "q": "What spool weights does RecyclingFabrik PLA come in?",
          "a": "Listed spool weights: 1 kg (1000 g)."
        },
        {
          "q": "What is the price per kilogram of RecyclingFabrik PLA?",
          "a": "Price per kilogram is not in our current sources."
        }
      ],
      "missing": [
        "speeds.printMmS",
        "speeds.volumetricMm3S",
        "drying",
        "enclosure",
        "hardenedNozzle",
        "pricePerKg"
      ],
      "brandPriority": false
    },
    {
      "slug": "silk-pla",
      "brand": "RecyclingFabrik",
      "brandSlug": "recyclingfabrik",
      "product": "Silk PLA",
      "material": "PLA",
      "materialSlug": "pla",
      "materialLabel": "PLA",
      "nozzleTempC": {
        "min": 190,
        "max": 230,
        "singleValue": false
      },
      "bedTempC": {
        "min": 50,
        "max": 70,
        "singleValue": false
      },
      "speeds": {
        "printMmS": {
          "min": null,
          "max": null
        },
        "volumetricMm3S": {
          "min": null,
          "max": null
        }
      },
      "drying": {
        "maxTempC": null,
        "hours": null,
        "source": null
      },
      "enclosure": {
        "required": null,
        "chamberTempC": {
          "min": null,
          "ideal": null,
          "max": null
        }
      },
      "hardenedNozzle": null,
      "hardenedNozzleBasis": null,
      "traits": {
        "variantCount": 1,
        "abrasiveVariants": 0,
        "carbonFiberVariants": 0,
        "glassFiberVariants": 0
      },
      "spoolWeightsG": [
        1000
      ],
      "emptySpoolWeightsG": [],
      "diametersMm": [
        1.75
      ],
      "densityGCm3": 1.24,
      "diameterToleranceMm": 0.02,
      "minNozzleDiameterMm": null,
      "shoreHardnessA": null,
      "certifications": [],
      "colors": [
        {
          "name": "Polished Glass (Transparent)",
          "hex": "#E4E7E5",
          "discontinued": false
        }
      ],
      "colorCount": 1,
      "discontinued": false,
      "pricePerKg": null,
      "priceCurrency": null,
      "sourceUrl": "https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/silk_pla/index.json",
      "datasheetUrl": null,
      "safetySheetUrl": null,
      "brandWebsite": "https://recyclingfabrik.com",
      "verifiedDate": "2026-10-13",
      "fieldSources": {
        "nozzleTempC": "open-filament-database",
        "bedTempC": "open-filament-database"
      },
      "provenance": [
        {
          "source": "Open Filament Database",
          "license": "MIT",
          "repository": "https://github.com/SimplyPrint/open-filament-database",
          "canonicalRepository": "https://github.com/OpenFilamentCollective/open-filament-database",
          "maintainer": "Open Filament Collective, facilitated by SimplyPrint",
          "dumpVersion": "2026.10.13",
          "generatedAt": "2026-10-13T03:01:57Z",
          "recordUrl": "https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/silk_pla/index.json",
          "fields": [
            "bedTempC",
            "brand",
            "colors",
            "densityGCm3",
            "diameterToleranceMm",
            "diametersMm",
            "material",
            "nozzleTempC",
            "product",
            "spoolWeightsG"
          ]
        }
      ],
      "ofd": {
        "brandSlug": "recyclingfabrik",
        "material": "PLA",
        "filamentSlug": "silk_pla",
        "uuid": "3c31a300-efa2-4eff-b1ec-f8f6cb66cfa8"
      },
      "spoolman": null,
      "citation": "RecyclingFabrik Silk PLA (PLA) has a recommended nozzle temperature of 190–230 °C and a recommended bed temperature of 50–70 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/recyclingfabrik/materials/PLA/filaments/silk_pla/index.json; dataset imported 2026-10-13).",
      "faq": [
        {
          "q": "What nozzle temperature does RecyclingFabrik Silk PLA recommend?",
          "a": "RecyclingFabrik Silk PLA lists a recommended nozzle temperature of 190–230 °C."
        },
        {
          "q": "What bed temperature does RecyclingFabrik Silk PLA recommend?",
          "a": "RecyclingFabrik Silk PLA lists a recommended bed temperature of 50–70 °C."
        },
        {
          "q": "What print speed does RecyclingFabrik Silk PLA list?",
          "a": "Print speed and volumetric flow are not in our current sources in the imported sources."
        },
        {
          "q": "Does RecyclingFabrik Silk PLA require an enclosure?",
          "a": "An enclosure requirement is not in our current sources. No chamber temperature is listed either."
        },
        {
          "q": "Does RecyclingFabrik Silk PLA require a hardened nozzle?",
          "a": "A hardened-nozzle requirement is not in our current sources."
        },
        {
          "q": "How should RecyclingFabrik Silk PLA be dried?",
          "a": "Drying temperature and drying time for RecyclingFabrik Silk PLA are not in our current sources."
        },
        {
          "q": "What spool weights does RecyclingFabrik Silk PLA come in?",
          "a": "Listed spool weights: 1 kg (1000 g)."
        },
        {
          "q": "What is the price per kilogram of RecyclingFabrik Silk PLA?",
          "a": "Price per kilogram is not in our current sources."
        }
      ],
      "missing": [
        "speeds.printMmS",
        "speeds.volumetricMm3S",
        "drying",
        "enclosure",
        "hardenedNozzle",
        "pricePerKg"
      ],
      "brandPriority": false
    }
  ]
}