# PETG vs ASA

Prusament PETG. Print at 240–260 °C (464–500 °F) nozzle, 70–90 °C (158–194 °F) bed. Listed speed up to 200 mm/s.

Bambu Lab ASA. Print at 235–260 °C (455–500 °F) nozzle, 90–110 °C (194–230 °F) bed. Dry 8 h at 80 °C (176 °F) if it's been open. Listed speed up to 250 mm/s.

## Sources & notes

Prusament PETG lists a nozzle of 240–260 °C (464–500 °F) and a bed of 70–90 °C (158–194 °F). Bambu Lab ASA lists a nozzle of 235–260 °C (455–500 °F) and a bed of 90–110 °C (194–230 °F). These are the catalog records for Prusament PETG and Bambu Lab ASA. Outdoor use is a separate question from the temperature table.

Prusament PETG lists 240–260 °C (464–500 °F).
Bambu Lab ASA lists 235–260 °C (455–500 °F).
Prusament PETG lists 70–90 °C (158–194 °F).
Bambu Lab ASA lists 90–110 °C (194–230 °F).