# Bambu Lab A1 mini

The Bambu Lab A1 mini lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 80 °C, according to https://bambulab.com/en/a1-mini/tech-specs. Checked 2026-10-14.

Checked 2026-10-14.

- Maximum nozzle: 300
- Maximum bed: 80
- Enclosure: not listed
- Stock nozzle hardened: no
- Direct drive: not listed
- AMS or MMU: AMS lite; AMS, AMS 2 Pro, and AMS HT need the AMS hub

Bambu Lab lists a 300 °C maximum hot end temperature, an 80 °C maximum build plate temperature, and a stainless steel nozzle.

The FAQ says a hardened steel nozzle is required for carbon-fiber or glass-fiber filament and is not the pre-installed nozzle.

Enclosure is not stated on the specification table checked here.

- [A1 mini technical specifications](https://bambulab.com/en/a1-mini/tech-specs)
- [A1 mini FAQ](https://wiki.bambulab.com/en/a1-mini/manual/faq)