# Overture High Speed PLA print settings on the Bambu Lab A1

Print at 190–220 °C nozzle, 25–60 °C bed. Dry 7 h at 50 °C if it's been open. Listed speed up to 300 mm/s.

A1 can reach the listed nozzle and bed.

## Sources & notes

Bambu Lab A1 with Overture High Speed PLA: The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.

Source: https://overture3d.com/products/overture-pla
Checked: 2026-10-14