# Bambu Lab PLA Basic print settings on the Bambu Lab P1S

Whether an enclosure is required is not in our current sources.

Print at 190–230 °C nozzle, 35–45 °C bed. Dry 8 h at 50 °C if it's been open. Listed speed up to 300 mm/s.

## Sources & notes

Bambu Lab P1S with Bambu Lab PLA Basic: Whether an enclosure is required is not in our current sources.

Source: https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Technical_Data_Sheet_bf3411ce-be39-4db7-9669-1b4671d2196b.pdf?v=1734060943
Manufacturer page checked: 2026-10-14