# Overture High Speed PLA print settings on the Bambu Lab P1S

P1S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.

Print at 190–220 °C nozzle, 25–60 °C bed. Dry 7 h at 50 °C if it's been open. Listed speed up to 300 mm/s.

## Sources & notes

Bambu Lab P1S with Overture High Speed PLA: P1S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.

Source: https://overture3d.com/products/overture-pla
Manufacturer page checked: 2026-10-14