Food contact
What filament should I use for food contact?
First in this ranking: Prusament PETG.
- Nozzle240–260 °C
- Bed70–90 °C
- SpeedNot listed
- Dry—
- Density1.27 g/cm³
Ranked filaments
| Rank | Filament | Material | Nozzle | Bed | Price / kg | Datasheet | Retailer |
|---|---|---|---|---|---|---|---|
| 1 | Prusament PETGThe material Prusa discusses first in the food-safe article. The row is here so you can see that price, certification, and food-contact status are not listed. It is not a clearance to print a cup. | PETG | 240–260 | 70–90 | Not listed | Datasheet | Not configured |
| 2 | Polymaker Polylite PETGAnother PETG with listed temperatures. Same limit: no food-contact certification in this record. | PETG | 220–250 | 70–90 | Not listed | Datasheet | Not configured |
| 3 | Prusament PLAPLA is the other polymer Prusa says people treat as chemically quiet. Pigments and the printed surface still block a food-contact claim. | PLA | 205–225 | 40–60 | Not listed | Not listed | Not configured |
How the ranking was chosen
The table is deliberately not a shopping list of safe spools. It shows the products people mean when they say PETG or PLA, and it shows the empty certification and price cells.
Pros and cons
Pros
- The honest answer is on the first line, which is what a food-contact question needs.
- PETG and PLA are listed because those are the polymers the Prusa articles discuss, not because a certification was found.
Cons
- No row in this catalog carries a food-contact mark. One medical ABS elsewhere in the database is an ISO 10993 record, which is not a food-contact approval and is not recommended here.
- A food-safe epoxy is a coating process Prusa describes. It is not a filament, and this page does not rank coatings.
Printer considerations
- Prusa says a brass nozzle wears into the print and is not the nozzle to use if food contact is even being considered. A stainless or titanium nozzle is the hardware they name.
- The printer’s food-contact status is not a field in this catalog. An enclosed printer does not make the part food-safe.
- Do not use ABS or ASA for this job. Prusa’s food-grade write-up treats those families as the materials to avoid for direct contact.
What the community says
People often arrive believing ‘PETG is food safe’ because soda bottles are PET. Prusa’s article is the correction: the polymer family is not the printed object, color additives are a separate question, and they do not recommend 3D prints as food containers. The blog post says even a filament with food-grade resin still needs a coating before direct contact.
Sources & notes
Accessed 14 October 2026.
- Food safe FDM printing, Prusa Knowledge Base manufacturer
- How to make food-grade 3D printed models, Prusa manufacturer
- PETG, Prusa Knowledge Base manufacturer
- Prusament PETG technical data sheet datasheet
- How big is the jump between PLA, PETG, and TPU?, r/3Dprinting reddit
Related questions
- What filament should a beginner use?Beginners
- What filament should I use for a strong part?Strength
- What filament should I use on a printer with no enclosure?Open printers
Questions
Is natural PETG food safe?
Prusa says an uncolored PETG is the better guess inside that family and still tells you not to print dishes. This catalog does not record a food-contact certification on Prusament PETG.
Can I print a cookie cutter?
Prusa discusses cutters as a short-contact case and still describes coating, a steel nozzle, and research. This page does not bless a cutter model.