Fits
colorFabb PLA on the Kobra 3 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–230 °C (374–446 °F)
- Bed50–70 °C (122–158 °F)
- Speed—
- Dry—
- Density1.24 g/cm³
Print at 190–230 °C (374–446 °F) nozzle, 50–70 °C (122–158 °F) bed.
Kobra 3 Max maximums: nozzle 300 °C (572 °F), bed 90 °C (194 °F).
Sources & notes
Anycubic Kobra 3 Max with colorFabb PLA: Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The quick start lists a 300 °C maximum nozzle temperature and a 90 °C maximum heatbed temperature. The Combo includes the ACE Pro.
The FAQ recommends setting up a warm chamber for ABS, so the stock printer is recorded as open. Nozzle alloy and drive type are not stated.
Questions
Can the Anycubic Kobra 3 Max reach the listed PLA nozzle temperature?
The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F).
Can the Kobra 3 Max reach the listed bed temperature?
The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 90 °C (194 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.