Incomplete
ELEGOO PAHT-CF on the Kobra 3 Max
Not enough published numbers to say if Kobra 3 Max can print this.
- NozzleNot listed
- BedNot listed
- SpeedNot listed
- Dry—
- Density1.06 g/cm³
Kobra 3 Max maximums: nozzle 300 °C, bed 90 °C.
Sources & notes
Anycubic Kobra 3 Max with ELEGOO PAHT-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
The quick start lists a 300 °C maximum nozzle temperature and a 90 °C maximum heatbed temperature. The Combo includes the ACE Pro.
The FAQ recommends setting up a warm chamber for ABS, so the stock printer is recorded as open. Nozzle alloy and drive type are not stated.
Questions
Can the Anycubic Kobra 3 Max reach the listed PAHT-CF nozzle temperature?
Nozzle temperature is not listed for this filament.
Can the Kobra 3 Max reach the listed bed temperature?
Bed temperature is not listed for this filament.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer.