Fits
Polymaker PolyMax PLA on the Kobra 3 Max
Kobra 3 Max can reach the listed nozzle and bed.
- Nozzle190–230 °C
- Bed25–60 °C
- SpeedNot listed
- Dry55 °C maximum
- Density1.21 g/cm³
Kobra 3 Max maximums: nozzle 300 °C, bed 90 °C.
Sources & notes
Anycubic Kobra 3 Max with Polymaker PolyMax PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
The quick start lists a 300 °C maximum nozzle temperature and a 90 °C maximum heatbed temperature. The Combo includes the ACE Pro.
The FAQ recommends setting up a warm chamber for ABS, so the stock printer is recorded as open. Nozzle alloy and drive type are not stated.
Questions
Can the Anycubic Kobra 3 Max reach the listed PolyMax PLA nozzle temperature?
The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C.
Can the Kobra 3 Max reach the listed bed temperature?
The listed bed maximum of 60 °C is within this printer's maximum of 90 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.