Polymaker PVA PolyDissolve S1 on the Kobra 3 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle215–225 °C
- Bed25–60 °C
- Speed—
- Dry—
- Density1.13 g/cm³
Print at 215–225 °C nozzle, 25–60 °C bed.
Kobra 3 Max maximums: nozzle 300 °C, bed 90 °C.
Sources & notes
Anycubic Kobra 3 Max with Polymaker PVA PolyDissolve S1: Whether an enclosure is required is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The quick start lists a 300 °C maximum nozzle temperature and a 90 °C maximum heatbed temperature. The Combo includes the ACE Pro.
The FAQ recommends setting up a warm chamber for ABS, so the stock printer is recorded as open. Nozzle alloy and drive type are not stated.
Questions
Can the Anycubic Kobra 3 Max reach the listed PVA PolyDissolve S1 nozzle temperature?
The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C.
Can the Kobra 3 Max reach the listed bed temperature?
The listed bed maximum of 60 °C is within this printer's maximum of 90 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.