Bambu Lab
Bambu Lab A1
Filter a material table with this printer. The source URL is under Sources & notes.
- Nozzle max300 °C
- Bed max100 °C
- Enclosure—
- HardenedNo
- AMS / MMUAMS lite
Sources & notes
The Bambu Lab A1 lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 100 °C, according to https://wiki.bambulab.com/en/a1/manual/faq. Checked 2026-10-14.
Source checked 14 October 2026.
| Maximum nozzle | 300 °C |
|---|---|
| Maximum bed | 100 °C |
| Enclosure | Not listed |
| Stock nozzle hardened | No |
| Direct drive | Not listed |
| AMS or MMU | AMS lite; AMS, AMS 2 Pro, and AMS HT need the A1 AMS Hub |
The A1 FAQ states a maximum hotend temperature of 300 °C and a maximum heatbed temperature of 100 °C.
The same FAQ says the printer is pre-installed with a 0.4 mm stainless steel nozzle. Hardened steel nozzles are sold separately.
The FAQ does not call the frame open or enclosed, so enclosure is left empty.
Questions
What maximum nozzle temperature does the Bambu Lab A1 list?
300 °C, according to https://wiki.bambulab.com/en/a1/manual/faq.
What maximum bed temperature does the Bambu Lab A1 list?
100 °C, according to https://wiki.bambulab.com/en/a1/manual/faq.
Is the A1 enclosed?
Enclosure is not stated in the source checked for this record.
Does the A1 ship with a hardened nozzle?
The source describes a stock nozzle that is not hardened.
Quoted filament settings
Materials on this printer
Open a material to see which listed limits the A1 can meet.