Bambu Lab A1 mini
Bambu Lab A1 mini against 113 ASA products: 2 are within the published limits, 96 exceed a published limit, and 15 cannot be judged because a temperature or printer limit was not published. Checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ASA | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Bambu Lab ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Bambu Lab ASA Aero | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Bambu Lab ASA-CF | Outside limits | Nozzle temperature is not listed for this filament. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Bambu Lab Matte ASA CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| colorFabb ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Creality HP ASA | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ELEGOO ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eryone ASA | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eryone ASA High-Speed | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eryone ASA Light-Weight | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eryone ASA-CF | Outside limits | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Eryone ASA-GF | Outside limits | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| eSUN 3D ASA+ | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| extrudr DuraPro ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| extrudr DuraPro Matte ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fillamentum ASA Extrafill | Outside limits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed range reaches 105 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Overture ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Overture ASA Basic | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Polymaker ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Polymaker Polylite ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Prusament ASA | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Siraya Tech Fibreheart ASA-GF | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| SUNLU ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DEA ASA | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DJAKE ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DO ASA | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DPower ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech ASA 3DXMax | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech ASA CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Alzament ASA | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Ambrosia ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Ambrosia ASA Dolos Color Shifting | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Ambrosia ASA Galactic | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Ambrosia ASA-CF | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Ambrosia ASA-GF | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Atomic Filament ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Atomic Filament ASA CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| AURAPOL ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| AzureFilm ASA Original | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| AzureFilm ASA Prime | Outside limits | The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Buddy3D ASA | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| COEX 3D ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| COEX 3D Silk ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Cookiecad ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Devil Design ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eolas Prints ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| EPAX ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy Matte ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberon Fiberon ASA-CF 08 | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FilamentPM ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FilamentPM ASA CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| FLASHFORGE ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FLASHFORGE ASA Basic | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura ASA ApolloX | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura ASA ApolloX CF10 | Outside limits | The listed nozzle maximum of 265 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| FormFutura ASA ApolloX Flame Retardant | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura ASA ApolloX Foaming | Outside limits | The listed nozzle maximum of 285 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura ASA ApolloX Kevlar | Outside limits | The listed nozzle maximum of 265 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 85 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura ASA ReForm – rApollo | Fits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Francofil ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| GST3D ASA 900Grs | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| IEMAI ASA | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| IEMAI CF-ASA | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Inslogic ASA | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| iSangHu Gradiant ASA | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| iSANMATE ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| LDO ASA | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| LDO ASA-CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Mosaic ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nebula ASA Tech 301 | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil X CF CF ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Paramount 3D ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Polar Filament ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PolyLite ASA | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PolyLite Galaxy ASA | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaCreator ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaSelect ASA+ | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Print With Smile ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Professional LAB ASA | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Push Plastic ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| QIDI Tech ASA | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| QIDI Tech ASA-Aero | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments ASA 5Kevlar | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments ASA CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| ROSA3D Filaments ASA GF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| SainSmart ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SainSmart ASA CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| SainSmart Gt 3 ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Sakata 3D ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SMART MATERIALS 3D ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SMART MATERIALS 3D ASA GF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| SmartPrint ASA | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum ASA 275 | Fits | The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum ASA CF | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Spectrum ASA Kevlar | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum ASA-X CF10 | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Spectrum ASA-X GF10 | Outside limits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Spectrum X Gf10 GF ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Tectonic 3D Aura ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TEQStone ASA | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| The Filament ASA | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| The Filament ASA CF | Outside limits | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| TINMORRY ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Voxelab ASA-CF | Outside limits | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened. | |
| Winkle ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Zyltech ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Zyltech Matte ASA | Outside limits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. |
As an Amazon Associate we earn from qualifying purchases.
Bambu Lab A1 mini against 113 ASA products: 2 are within the published limits, 96 exceed a published limit, and 15 cannot be judged because a temperature or printer limit was not published. Checked 14 October 2026.
The filament's listed nozzle and bed maxima do not exceed the printer's listed maxima, and no recorded enclosure or hardened-nozzle requirement conflicts with the printer. Missing fields are not treated as a pass.
0 in the tray
Compare