Partial

Eryone PA12-CF on the A1 mini

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

No nozzle or bed temperature on the source.

Nozzle—

Bed—

Shared scale, 0–320 °C (32–608 °F). A missing bar means that temperature is not in our current sources.

A1 mini maximums: nozzle 300 °C (572 °F), bed 80 °C (176 °F).

Sources & notes

Bambu Lab A1 mini with Eryone PA12-CF: This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Bambu Lab lists a 300 °C maximum hot end temperature, an 80 °C maximum build plate temperature, and a stainless steel nozzle.

The FAQ says a hardened steel nozzle is required for carbon-fiber or glass-fiber filament and is not the pre-installed nozzle.

Enclosure is not stated on the specification table checked here.

Questions

Nozzle temperature is not in our current sources.

Bed temperature is not in our current sources.

Whether an enclosure is required is not in our current sources.

This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.