Fits
Bambu Lab PLA Silk Dual Color on the H2S
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle210–240 °C (410–464 °F)
- Bed35–45 °C (95–113 °F)
- Speedup to 250 mm/s
- Dry55 °C (131 °F) for 8 h
- Density1.32 g/cm³
Print at 210–240 °C (410–464 °F) nozzle, 35–45 °C (95–113 °F) bed. Dry 8 h at 55 °C (131 °F) if it's been open. Listed speed up to 250 mm/s.
H2S maximums: nozzle 350 °C (662 °F), bed 120 °C (248 °F).
Sources & notes
Bambu Lab H2S with Bambu Lab PLA Silk Dual Color: H2S can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 15 October 2026.
Bambu Lab PLA Silk Dual Color technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
The H2S technical specifications list a hardened steel nozzle, a 350 °C maximum nozzle temperature, and a 120 °C maximum heatbed temperature.
The product page describes a front door, a top cover, and enclosure alignment, and it says PLA and PETG can be printed without opening the door.
The specification lists active chamber heating to 65 °C. Filament odometry is supported with AMS. The page does not say an AMS unit is included, and it does not name the extruder direct drive.
Questions
Can the Bambu Lab H2S reach the listed PLA Silk Dual Color nozzle temperature?
The listed nozzle maximum of 240 °C (464 °F) is within this printer's maximum of 350 °C (662 °F).
Can the H2S reach the listed bed temperature?
The listed bed maximum of 45 °C (113 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.