Fits

Bambu Lab Support for PA/PET on the P1P

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Print at 260–290 °C nozzle, 80–100 °C bed. Dry at 80 °C if it's been open. No drying time on the source.

Nozzle260–290 °C

Bed80–100 °C

Shared scale, 0–320 °C. A missing bar means that temperature is not in our current sources.

P1P maximums: nozzle 300 °C, bed 100 °C.

Sources & notes

Bambu Lab P1P with Bambu Lab Support for PA/PET: P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.

The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.

Questions

The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C.

The listed bed maximum of 100 °C is within this printer's maximum of 100 °C.

Whether an enclosure is required is not in our current sources.

A hardened nozzle is not recorded for this filament.