FilamentFacts

Outside limits

Eryone PA6-GF on the P1P

P1P needs a hardened nozzle for this filament.

NozzleNot listed
BedNot listed
Shared scale, 0–320 °C. A missing bar means the source did not list that temperature.

P1P maximums: nozzle 300 °C, bed 100 °C.

Filament page · P1P

Sources & notes

Bambu Lab P1P with Eryone PA6-GF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened.

Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.

Filament source · Printer source · Filament JSON

The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.

The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.

Questions

Can the Bambu Lab P1P reach the listed PA6-GF nozzle temperature?

Nozzle temperature is not listed for this filament.

Can the P1P reach the listed bed temperature?

Bed temperature is not listed for this filament.

Is an enclosure required?

Enclosure required is not listed for this filament.

Is a hardened nozzle recorded?

A hardened nozzle is recorded for this filament. The stock nozzle is not hardened.