Eryone PLA Matte Dual-Color on the P1P
As an Amazon Associate we earn from qualifying purchases.
Not enough published numbers to say if P1P can print this.
- Nozzle—
- Bed—
- Speed—
- Dry75 °C maximum
- Density1.25 g/cm³
P1P maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Bambu Lab P1P with Eryone PLA Matte Dual-Color: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.
The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.
Questions
Can the Bambu Lab P1P reach the listed PLA Matte Dual-Color nozzle temperature?
Nozzle temperature is not listed for this filament.
Can the P1P reach the listed bed temperature?
Bed temperature is not listed for this filament.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.