Incomplete
Polymaker Panchroma CoPE on the P1P
Not enough published numbers to say if P1P can print this.
- NozzleNot listed
- BedNot listed
- SpeedNot listed
- Dry—
- Density—
P1P maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Bambu Lab P1P with Polymaker Panchroma CoPE: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 14 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.
The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.
Questions
Can the Bambu Lab P1P reach the listed Panchroma CoPE nozzle temperature?
Nozzle temperature is not listed for this filament.
Can the P1P reach the listed bed temperature?
Bed temperature is not listed for this filament.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.