Bambu Lab
Bambu Lab P1S
Filter a material table with this printer. The source URL is under Sources & notes.
- Nozzle max300 °C
- Bed max100 °C
- Enclosureenclosed
- HardenedNo
- AMS / MMUAMS
Sources & notes
The Bambu Lab P1S lists a maximum nozzle temperature of 300 °C and lists a maximum bed temperature of 100 °C, according to https://wiki.bambulab.com/en/p1/manual/unboxing-p1s. Checked 2026-10-14.
Source checked 14 October 2026.
| Maximum nozzle | 300 °C |
|---|---|
| Maximum bed | 100 °C |
| Enclosure | enclosed |
| Stock nozzle hardened | No |
| Direct drive | Yes |
| AMS or MMU | AMS |
The P1S specification table lists a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate. The shell is plastic and glass.
Bambu Lab describes the P1S as a fully enclosed body and says fiber-reinforced filament is not recommended until the extruder and hotend are upgraded.
The P1 series page describes a direct-drive extruder and AMS multi-color printing.
Questions
What maximum nozzle temperature does the Bambu Lab P1S list?
300 °C, according to https://wiki.bambulab.com/en/p1/manual/unboxing-p1s.
What maximum bed temperature does the Bambu Lab P1S list?
100 °C, according to https://wiki.bambulab.com/en/p1/manual/unboxing-p1s.
Is the P1S enclosed?
Recorded as enclosed.
Does the P1S ship with a hardened nozzle?
The source describes a stock nozzle that is not hardened.
Quoted filament settings
Materials on this printer
Open a material to see which listed limits the P1S can meet.