Fits
colorFabb CPE on the X1 Carbon
X1 Carbon can reach the listed nozzle and bed.
- Nozzle240–270 °C
- Bed70–90 °C
- SpeedNot listed
- Dry—
- Density1.25 g/cm³
X1 Carbon maximums: nozzle 300 °C, bed 110 °C.
Sources & notes
Bambu Lab X1 Carbon with colorFabb CPE: The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
The tech specs PDF lists a hardened steel nozzle and a 300 °C maximum hot end temperature.
Maximum build plate temperature is listed as 110 °C at 220 V and 120 °C at 110 V. The number stored here is 110.
The PDF lists a chamber monitoring camera and says filament odometry is optional with AMS. It does not use the word enclosed, so enclosure is left empty.
Questions
Can the Bambu Lab X1 Carbon reach the listed CPE nozzle temperature?
The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C.
Can the X1 Carbon reach the listed bed temperature?
The listed bed maximum of 90 °C is within this printer's maximum of 110 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.