Fits
Eryone PA12-CF on the X1 Carbon
X1 Carbon can reach the listed nozzle and bed.
- NozzleNot listed
- BedNot listed
- SpeedNot listed
- Dry—
- Density1.06 g/cm³
X1 Carbon maximums: nozzle 300 °C, bed 110 °C.
Sources & notes
Bambu Lab X1 Carbon with Eryone PA12-CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
The tech specs PDF lists a hardened steel nozzle and a 300 °C maximum hot end temperature.
Maximum build plate temperature is listed as 110 °C at 220 V and 120 °C at 110 V. The number stored here is 110.
The PDF lists a chamber monitoring camera and says filament odometry is optional with AMS. It does not use the word enclosed, so enclosure is left empty.
Questions
Can the Bambu Lab X1 Carbon reach the listed PA12-CF nozzle temperature?
Nozzle temperature is not listed for this filament.
Can the X1 Carbon reach the listed bed temperature?
Bed temperature is not listed for this filament.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.