Fits
eSUN 3D PLA-HS on the X2D
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–230 °C (374–446 °F)
- Bed50–70 °C (122–158 °F)
- Speed—
- Dry—
- Density1.24 g/cm³
Print at 190–230 °C (374–446 °F) nozzle, 50–70 °C (122–158 °F) bed.
X2D maximums: nozzle 300 °C (572 °F), bed 120 °C (248 °F).
Sources & notes
Bambu Lab X2D with eSUN 3D PLA-HS: X2D can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 15 October 2026.
Filament source · Printer source · Filament JSON
The X2D technical specifications list a hardened steel nozzle, a 300 °C maximum nozzle temperature, and a 120 °C maximum heatbed temperature.
The same table lists a door sensor and an outer frame of plastic, glass, and metal. The X2D product comparison labels the machine enclosed.
Filament odometry is listed as supported with AMS. The specification does not say an AMS unit is included, and it does not name the extruder direct drive.
Questions
Can the Bambu Lab X2D reach the listed PLA-HS nozzle temperature?
The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F).
Can the X2D reach the listed bed temperature?
The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.