Outside limits
ELEGOO PET-CF on the K1C
K1C cannot reach the listed nozzle temperature.
- Nozzle260–290 °C
- Bed90–110 °C
- SpeedNot listed
- Dry85 °C maximum
- Density1.32 g/cm³
K1C maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Creality K1C with ELEGOO PET-CF: The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.
Questions
Can the Creality K1C reach the listed PET-CF nozzle temperature?
The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C.
Can the K1C reach the listed bed temperature?
The listed bed range reaches 110 °C, above this printer's maximum of 100 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.