extrudr DuraPro CF PA12 on the K1C
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle240–270 °C
- Bed80–100 °C
- Speed—
- Dry—
- Density1.01 g/cm³
Print at 240–270 °C nozzle, 80–100 °C bed.
K1C maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Creality K1C with extrudr DuraPro CF PA12: Whether an enclosure is required is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.
Questions
Can the Creality K1C reach the listed DuraPro CF PA12 nozzle temperature?
The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C.
Can the K1C reach the listed bed temperature?
The listed bed maximum of 100 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened.