FilamentFacts

Fits

Polymaker PPS CF on the K1C

K1C can reach the listed nozzle and bed.

NozzleNot listed
BedNot listed
Shared scale, 0–320 °C. A missing bar means the source did not list that temperature.

K1C maximums: nozzle 300 °C, bed 100 °C.

Filament page · K1C

Sources & notes

Creality K1C with Polymaker PPS CF: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.

Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.

Filament source · Printer source · Filament JSON

Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.

Questions

Can the Creality K1C reach the listed PPS CF nozzle temperature?

Nozzle temperature is not listed for this filament.

Can the K1C reach the listed bed temperature?

Bed temperature is not listed for this filament.

Is an enclosure required?

Enclosure required is not listed for this filament.

Is a hardened nozzle recorded?

A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.