Fits
Protopasta Static Dissipative Carbon Fiber PLA on the K1C
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle195–225 °C (383–437 °F)
- Bed50–70 °C (122–158 °F)
- Speed—
- Dry—
- Density1.24 g/cm³
Print at 195–225 °C (383–437 °F) nozzle, 50–70 °C (122–158 °F) bed.
K1C maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Creality K1C with Protopasta Static Dissipative Carbon Fiber PLA: K1C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.
Questions
Can the Creality K1C reach the listed Static Dissipative Carbon Fiber PLA nozzle temperature?
The listed nozzle maximum of 225 °C (437 °F) is within this printer's maximum of 300 °C (572 °F).
Can the K1C reach the listed bed temperature?
The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened.