Outside limits

Siraya Tech Fibreheart PPA-CF on the K1C

K1C cannot reach the listed nozzle temperature.

Nozzle280–320 °C
Bed70–90 °C
SpeedNot listed
Dry—
Density1.2 g/cm³

Nozzle280–320 °C

Bed70–90 °C

Shared scale, 0–320 °C. A missing bar means the source did not list that temperature.

K1C maximums: nozzle 300 °C, bed 100 °C.

Filament page · K1C

Sources & notes

Creality K1C with Siraya Tech Fibreheart PPA-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.

Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.

Filament source · Printer source · Filament JSON

Creality lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a dual-gear direct drive extruder, a hardened steel nozzle tip, and an enclosed design with a glass door.

Questions

Can the Creality K1C reach the listed Fibreheart PPA-CF nozzle temperature?

The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C.

Can the K1C reach the listed bed temperature?

The listed bed maximum of 90 °C is within this printer's maximum of 100 °C.

Is an enclosure required?

Enclosure required is not listed for this filament.

Is a hardened nozzle recorded?

A hardened nozzle is recorded for this filament, and the stock nozzle is hardened.