Bambu Lab Support For PA/PET on the Centauri Carbon

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Print at 260–290 °C (500–554 °F) nozzle, 80–100 °C (176–212 °F) bed. Dry at 80 °C (176 °F) if it's been open. No drying time on the source.

Nozzle260–290 °C (500–554 °F)

Bed80–100 °C (176–212 °F)

Shared scale, 0–320 °C (32–608 °F). A missing bar means that temperature is not in our current sources.

Centauri Carbon maximums: nozzle 320 °C (608 °F), bed not in our current sources.

Sources & notes

Elegoo Centauri Carbon with Bambu Lab Support for PA/PET: This printer's maximum bed temperature is not in our current sources.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Elegoo describes a 320 °C brass-hardened steel nozzle and a fully enclosed chamber.

The product page describes a heated bed and does not publish a maximum bed temperature, so that field is empty.

Questions

The listed nozzle maximum of 290 °C (554 °F) is within this printer's maximum of 320 °C (608 °F).

This printer's maximum bed temperature is not in our current sources.

Whether an enclosure is required is not in our current sources.

A hardened nozzle is not recorded for this filament.