Prusa CORE One+
Prusa CORE One+ against 158 ABS products: 106 fit, 25 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 27 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ABS-GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Creality ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Hyper ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D ABS+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D ABS+CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D ABS+HS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox Glow ABS | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Inland ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland Glow ABS | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Kingroon ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture Glow ABS | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Polymaker ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Metallic Polylite Silk ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polylite ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Silk ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Fibreheart ABS HT HF | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Fibreheart ABS-CF Core | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Siraya Tech Fibreheart ABS-GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SUNLU ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Pro ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DE Pirate Black | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ABS 3DXMax | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ABS 3DXStat ESD | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ABS 3DXTech | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ABS CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| 3DXTech ABS GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Add-North ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North rABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ABS Matte | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia Über ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament ABS CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| AURAPOL ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ABS Plus | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ABS Prime | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D Matte ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy R ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Refill ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Refill R ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentworld ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filatech ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE D Series ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ABSpro | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ABSpro Flame Retardant | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura EasyFil ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura EasyFil ABS - Glow in the Dark | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| FormFutura Premium ABS Medical | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ReForm - rTitan | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura TitanX | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech ABS+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech Upgrade ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks ABS CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Gizmo Dorks Color Change ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Fluorescent ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Glow ABS | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Gizmo Dorks Low Odor ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Thermochromic ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IC3D ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-ABS | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| IEMAI ESD-ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic ABS FR V0 | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic ABS GF10 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| kexcelled The K5 ABS T | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LDO ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| MatterHackers ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Mosaic ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil Glow ABS | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Nobufil X Astro ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil X Candy ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil X Industrial ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil X Matt Matte ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil X Neon ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D ABS CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| PrimaCreator ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Glow ABS | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| PrimaCreator Primaselect ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primaselect Glow ABS | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| PrimaCreator Primavalue ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Print With Smile ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid ABS CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Push Plastic ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Push Plastic CF ABS | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Push Plastic Matte ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ABS Metal Rapido | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ABS Rapido | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ABS-GF25 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| QIDI Tech Odorless ABS Rapido | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ABS V0 FR | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Matte ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SOVB 3D Fil ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SOVB 3D Glow ABS | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Spectrum ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ABS FR V0 | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ABS GP450 | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ABS Kevlar | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ABS Medical | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum smart ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D Aura ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY ABS Pro | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Verbatim ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle ABS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO ABS | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Eryone ABS-GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Eryone ABS-PC | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS+ | — | Nozzle temperature is not in our current sources. | |
| Overture ABS Basic | — | Nozzle temperature is not in our current sources. | |
| SUNLU ABS-FR | — | Nozzle temperature is not in our current sources. | |
| SUNLU High Speed ABS | — | Nozzle temperature is not in our current sources. | |
| SUNLU PC-ABS | — | Nozzle temperature is not in our current sources. | |
| Alzament ABS | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy ABS ESD | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy ABS PLUS | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy EASY ABS | — | Nozzle temperature is not in our current sources. | |
| GST3D ABS | — | Nozzle temperature is not in our current sources. | |
| Nebula ABS Art Glowing | — | Nozzle temperature is not in our current sources. | |
| Nebula ABS Art Marble Gray | — | Nozzle temperature is not in our current sources. | |
| Nebula ABS Art Thermo | — | Nozzle temperature is not in our current sources. | |
| Nebula ABS Tech 702 | — | Nozzle temperature is not in our current sources. | |
| PolyLite ABS | — | Nozzle temperature is not in our current sources. | |
| PolyLite Galaxy ABS | — | Nozzle temperature is not in our current sources. | |
| PolyLite Metallic ABS | — | Nozzle temperature is not in our current sources. | |
| PolyLite Neon ABS | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect ABS | — | Nozzle temperature is not in our current sources. | |
| PrimaValue ABS | — | Nozzle temperature is not in our current sources. | |
| Professional LAB ABS | — | Nozzle temperature is not in our current sources. | |
| SmartPrint ABS | — | Nozzle temperature is not in our current sources. | |
| Snapmaker ABS | — | Nozzle temperature is not in our current sources. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Prusa CORE One+ against 158 ABS products: 106 fit, 25 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 27 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare