Outside limits
Bambu Lab PPA-CF on the CORE One+
As an Amazon Associate we earn from qualifying purchases.
CORE One+ needs a hardened nozzle for this filament.
- Nozzle—
- Bed100–120 °C
- Speedup to 100 mm/s
- Dry—
- Density1.25 g/cm³
CORE One+ maximums: nozzle 290 °C, bed 120 °C.
Sources & notes
Prusa CORE One+ with Bambu Lab PPA-CF: Nozzle temperature is not listed for this filament. The listed bed maximum of 120 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Bambu Lab PPA-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.
An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.
Questions
Can the Prusa CORE One+ reach the listed PPA-CF nozzle temperature?
Nozzle temperature is not listed for this filament.
Can the CORE One+ reach the listed bed temperature?
The listed bed maximum of 120 °C is within this printer's maximum of 120 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is recorded for this filament. The stock nozzle is not hardened.