Anycubic ABS on the MK4S

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

No nozzle or bed temperature on the source. Dry at 80 °C if it's been open. No drying time on the source.

Nozzle—

Bed—

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

MK4S maximums: nozzle 290 °C, bed 120 °C.

Sources & notes

Prusa MK4S with Anycubic ABS: Nozzle temperature is not in our current sources.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a Nextruder direct drive, and a brass CHT nozzle.

The comparison table on that page marks the enclosed chamber as not included, with an optional enclosure. MMU3 is optional.

Questions

Nozzle temperature is not in our current sources.

Bed temperature is not in our current sources.

Whether an enclosure is required is not in our current sources.

A hardened nozzle is not recorded for this filament.