Partial
eSUN 3D PA6 PA-CF on the MK4S
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed—
- Speed—
- Dry—
- Density1.24 g/cm³
No nozzle or bed temperature on the source.
MK4S maximums: nozzle 290 °C, bed 120 °C.
Sources & notes
Prusa MK4S with eSUN 3D PA6 PA-CF: This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a Nextruder direct drive, and a brass CHT nozzle.
The comparison table on that page marks the enclosed chamber as not included, with an optional enclosure. MMU3 is optional.
Questions
Can the Prusa MK4S reach the listed PA6 PA-CF nozzle temperature?
Nozzle temperature is not in our current sources.
Can the MK4S reach the listed bed temperature?
Bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.