FilamentFacts

Incomplete

Overture PLA Rock on the MK4S

Not enough published numbers to say if MK4S can print this.

NozzleNot listed
BedNot listed
Shared scale, 0–320 °C. A missing bar means the source did not list that temperature.

MK4S maximums: nozzle 290 °C, bed 120 °C.

Filament page · MK4S

Sources & notes

Prusa MK4S with Overture PLA Rock: Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.

Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.

Filament source · Printer source · Filament JSON

Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a Nextruder direct drive, and a brass CHT nozzle.

The comparison table on that page marks the enclosed chamber as not included, with an optional enclosure. MMU3 is optional.

Questions

Can the Prusa MK4S reach the listed PLA Rock nozzle temperature?

Nozzle temperature is not listed for this filament.

Can the MK4S reach the listed bed temperature?

Bed temperature is not listed for this filament.

Is an enclosure required?

Enclosure required is not listed for this filament.

Is a hardened nozzle recorded?

A hardened nozzle is not recorded for this filament.