Outside limits
Bambu Lab ASA-CF on the XL
As an Amazon Associate we earn from qualifying purchases.
XL needs a hardened nozzle for this filament.
- Nozzle—
- Bed80–100 °C
- Speedup to 250 mm/s
- Dry80 °C for 8 h
- Density1.02 g/cm³
XL maximums: nozzle 290 °C, bed 120 °C.
Sources & notes
Prusa XL with Bambu Lab ASA-CF: Nozzle temperature is not listed for this filament. The listed bed maximum of 100 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. The stock nozzle is not hardened.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Bambu Lab ASA-CF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.
Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.
Questions
Can the Prusa XL reach the listed ASA-CF nozzle temperature?
Nozzle temperature is not listed for this filament.
Can the XL reach the listed bed temperature?
The listed bed maximum of 100 °C is within this printer's maximum of 120 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is recorded for this filament. The stock nozzle is not hardened.