Fits

Bambu Lab Support For PA/PET on the XL

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Print at 260–290 °C (500–554 °F) nozzle, 80–100 °C (176–212 °F) bed. Dry at 80 °C (176 °F) if it's been open. No drying time on the source.

Nozzle260–290 °C (500–554 °F)

Bed80–100 °C (176–212 °F)

Shared scale, 0–320 °C (32–608 °F). A missing bar means that temperature is not in our current sources.

XL maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).

Sources & notes

Prusa XL with Bambu Lab Support for PA/PET: XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.

Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.

Questions

The listed nozzle maximum of 290 °C (554 °F) is within this printer's maximum of 290 °C (554 °F).

The listed bed maximum of 100 °C (212 °F) is within this printer's maximum of 120 °C (248 °F).

Whether an enclosure is required is not in our current sources.

A hardened nozzle is not recorded for this filament.