Fits
Overture High Speed TPU on the XL
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle210–240 °C (410–464 °F)
- Bed30–60 °C (86–140 °F)
- Speed—
- Dry70 °C (158 °F) maximum
- Density1.21 g/cm³
Print at 210–240 °C (410–464 °F) nozzle, 30–60 °C (86–140 °F) bed. Dry at 70 °C (158 °F) if it's been open. No drying time on the source.
XL maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa XL with Overture High Speed TPU: XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.
Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.
Questions
Can the Prusa XL reach the listed High Speed TPU nozzle temperature?
The listed nozzle maximum of 240 °C (464 °F) is within this printer's maximum of 290 °C (554 °F).
Can the XL reach the listed bed temperature?
The listed bed maximum of 60 °C (140 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.