Partial
Prusament PC-CF on the XL
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle275–295 °C (527–563 °F)
- Bed100–120 °C (212–248 °F)
- Speed—
- Dry—
- Density1.22 g/cm³
Print at 275–295 °C (527–563 °F) nozzle, 100–120 °C (212–248 °F) bed.
XL maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa XL with Prusament PC-CF: The listed nozzle range reaches 295 °C (563 °F), above this printer's maximum of 290 °C (554 °F). This printer cannot reach the full recommended range. The low end, 275 °C (527 °F), is within that maximum.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.
Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.
Questions
Can the Prusa XL reach the listed PC-CF nozzle temperature?
The listed nozzle range reaches 295 °C (563 °F), above this printer's maximum of 290 °C (554 °F). This printer cannot reach the full recommended range. The low end, 275 °C (527 °F), is within that maximum.
Can the XL reach the listed bed temperature?
The listed bed maximum of 120 °C (248 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.