Fits
Polymaker PET CF on the Q1 Pro
As an Amazon Associate we earn from qualifying purchases.
Q1 Pro can reach the listed nozzle and bed.
- Nozzle220–250 °C
- Bed70–90 °C
- Speed—
- Dry—
- Density1.38 g/cm³
Q1 Pro maximums: nozzle 350 °C, bed not published.
Sources & notes
Qidi Q1 Pro with Polymaker PET CF: The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
Qidi lists print head temperature ≤350 °C, a direct extruder, and 60 °C independent chamber heating.
The stock nozzle is described as bimetal. A hardened-steel nozzle is a separate product, so the stock hardened-nozzle field is empty.
The specification table checked here does not list a maximum bed temperature. The product page says the Q1 Pro is discontinued.
Questions
Can the Qidi Q1 Pro reach the listed PET CF nozzle temperature?
The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C.
Can the Q1 Pro reach the listed bed temperature?
This printer's maximum bed temperature is not listed.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer.