Prusament PA11-CF on the Q1 Pro

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Print at 275–295 °C nozzle, 95–115 °C bed.

Nozzle275–295 °C

Bed95–115 °C

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

Q1 Pro maximums: nozzle 350 °C, bed not in our current sources.

Sources & notes

Qidi Q1 Pro with Prusament PA11-CF: This printer's maximum bed temperature is not in our current sources.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Qidi lists print head temperature ≤350 °C, a direct extruder, and 60 °C independent chamber heating.

The stock nozzle is described as bimetal. A hardened-steel nozzle is a separate product, so the stock hardened-nozzle field is empty.

The specification table checked here does not list a maximum bed temperature. The product page says the Q1 Pro is discontinued.

Questions

The listed nozzle maximum of 295 °C is within this printer's maximum of 350 °C.

This printer's maximum bed temperature is not in our current sources.

Whether an enclosure is required is not in our current sources.

This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.