SUNLU Glow PLA on the Q1 Pro
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–230 °C
- Bed50–70 °C
- Speed—
- Dry—
- Density1.24 g/cm³
Print at 190–230 °C nozzle, 50–70 °C bed.
Q1 Pro maximums: nozzle 350 °C, bed not in our current sources.
Sources & notes
Qidi Q1 Pro with SUNLU Glow PLA: This printer's maximum bed temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Qidi lists print head temperature ≤350 °C, a direct extruder, and 60 °C independent chamber heating.
The stock nozzle is described as bimetal. A hardened-steel nozzle is a separate product, so the stock hardened-nozzle field is empty.
The specification table checked here does not list a maximum bed temperature. The product page says the Q1 Pro is discontinued.
Questions
Can the Qidi Q1 Pro reach the listed Glow PLA nozzle temperature?
The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C.
Can the Q1 Pro reach the listed bed temperature?
This printer's maximum bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources.