Fits
Bambu Lab PLA Lite on the SV08 Max
As an Amazon Associate we earn from qualifying purchases.
SV08 Max can reach the listed nozzle and bed.
- Nozzle190–240 °C
- Bed35–65 °C
- Speedup to 250 mm/s
- Dry65 °C maximum
- Density1.4 g/cm³
SV08 Max maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Sovol SV08 Max with Bambu Lab PLA Lite: The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 65 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Bambu Lab PLA Lite technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.
Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.
Questions
Can the Sovol SV08 Max reach the listed PLA Lite nozzle temperature?
The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C.
Can the SV08 Max reach the listed bed temperature?
The listed bed maximum of 65 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.