Outside limits
Siraya Tech Fibreheart PET-CF on the SV08 Max
SV08 Max cannot reach the listed nozzle temperature.
- Nozzle280–320 °C
- Bed60–80 °C
- SpeedNot listed
- Dry—
- Density1.3 g/cm³
SV08 Max maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Sovol SV08 Max with Siraya Tech Fibreheart PET-CF: The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.
Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.
Questions
Can the Sovol SV08 Max reach the listed Fibreheart PET-CF nozzle temperature?
The listed nozzle range reaches 320 °C, above this printer's maximum of 300 °C.
Can the SV08 Max reach the listed bed temperature?
The listed bed maximum of 80 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer.