How many PA12 products list a nozzle temperature?
19 of 26 list a nozzle temperature. 18 list a bed temperature. Dataset verified date 13 October 2026.
Material
PA12
18 publish a bed temperature. An empty cell was empty in the source.
- Products26
- Nozzle19
- Bed18
Choose a printer. A blank spec stays blank.
26 products
| This printer | Compare | Buy | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Eryone | PA12 Nylon | — | — | — | 1 kg (1000 g) | — | — | ||
| Eryone | PA12-GF | — | — | — | 1 kg (1000 g) | Yes | — | ||
| extrudr | DuraPro PA12 | 240–270 | 80–100 | — | 700 g and 2 kg (2000 g) | — | — | ||
| 3DXTech | PA12 | 240–270 | 80–100 | — | 1 kg (1000 g) | — | — | ||
| 3DXTech | PA12 3DXStat ESD | 240–270 | 80–100 | — | 1 kg (1000 g) | — | — | ||
| 3DXTech | PA12 GF | 240–270 | 80–100 | — | 1 kg (1000 g) | Yes | — | ||
| Add-North | PA12 Addbor N25 | 255–275 | — | 50 °C maximum | 750 g and 1 kg (1000 g) | — | — | ||
| Add-North | PA12 Addlantis | — | — | 70 °C maximum | 1 kg (1000 g) | — | — | ||
| Add-North | PA12 Adura | — | — | 70 °C maximum | 500 g and 1 kg (1000 g) | — | — | ||
| Add-North | PA12 Adura FDA | — | — | 70 °C maximum | 500 g and 1 kg (1000 g) | — | — | ||
| Add-North | PA12 Adura X | — | — | 70 °C maximum | 500 g and 1 kg (1000 g) | — | — | ||
| Devil Design | PA12 | 240–270 | 80–100 | — | 330 g and 800 g | — | — | ||
| Fiberlogy | Nylon Gf15 GF PA12 | 240–270 | 80–100 | — | 1 kg (1000 g) | Yes | — | ||
| Fiberlogy | Nylon PA12 | 255–270 | 100 | — | 750 g | — | — | ||
| Fiberlogy | Nylon PA12+GF15 | — | — | — | 500 g | Yes | — | ||
| Fiberlogy | PA12 | 240–270 | 80–100 | — | 1 kg (1000 g) | — | — | ||
| FiberThree | F3 PA Pure Lite | 240–270 | 80–100 | — | 1 kg (1000 g) | — | — | ||
| FiberThree | PA12 | 240–270 | 80–100 | — | — | — | — | ||
| FilamentPM | PA12 | 240–270 | 80–100 | — | 1 kg (1000 g) | — | — | ||
| IEMAI | GF-PA12 | 260–300 | 80–110 | — | 1 kg (1000 g) | Yes | — | ||
| IEMAI | PA12 | 250–290 | 80–110 | — | 1 kg (1000 g) | — | — | ||
| MatterHackers | PA12 GF | 240–270 | 80–100 | — | 1 kg (1000 g) | Yes | — | ||
| Polar Filament | PA12 | 240–270 | 80–100 | — | 1 kg (1000 g) | — | — | ||
| PrimaCreator | Nylonpower Glass Primaselect GF PA12 | 240–270 | 80–100 | — | 1 kg (1000 g) | Yes | — | ||
| PrimaCreator | PA12 GF | 240–270 | 80–100 | — | — | — | — | ||
| QIDI Tech | PA12 S-White Support | 280–300 | 40–80 | — | 1 kg (1000 g) | — | — |
As an Amazon Associate we earn from qualifying purchases.
Questions
Does a blank PA12 cell mean the filament cannot be printed?
No. An em dash means the manufacturer did not publish that number. It is not a recommendation to avoid that temperature, and it is not filled from a typical range for the material.
What does the printer filter compare?
The selected printer’s published maximum nozzle and bed temperatures, plus enclosure and hardened-nozzle when both the printer and the filament record state them. A missing filament field stays blank and is not counted as a fit.