Anycubic Kobra 3 Max
Anycubic Kobra 3 Max against 295 PETG products: 185 fit, 2 cannot reach the full recommended range, 1 cannot print this material at a recommended temperature, and 107 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Amolen PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic Translucent PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PETG Basic | — | Nozzle temperature is not in our current sources. | |
| Bambu Lab PETG HF | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PETG Matte | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PETG Translucent | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PETG-CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| colorFabb PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality CR-PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Hyper PETG | — | Nozzle temperature is not in our current sources. | |
| Creality PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Soleyin Basic PETG | — | Bed temperature is not in our current sources. | |
| ELEGOO PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PETG PRO | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PETG Translucent | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PETG-CF | — | Nozzle temperature is not in our current sources. | |
| ELEGOO PETG-GF | — | Nozzle temperature is not in our current sources. | |
| ELEGOO RAPID PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone PETG | — | Nozzle temperature is not in our current sources. | |
| Eryone PETG-CF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ESUN PETG Matte | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PETG-Basic | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PETG-Matte | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PETG+CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| eSUN 3D PETG+HS | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D Silk PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr Glow PETG | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| extrudr PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland PETG+ | — | Nozzle temperature is not in our current sources. | |
| JAYO PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon High Speed PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Overture High Speed PETG Refill | — | Nozzle temperature is not in our current sources. | |
| Overture PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PETG Basic | — | Nozzle temperature is not in our current sources. | |
| Overture PETG Refill | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Polymaker Polylite PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polymax PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Glitter PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Metallic PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Protopasta Recycled PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Silk PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Simply PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Static Dissipative PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Translucent PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament Matte PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament PETG CF | Partial | The listed bed range reaches 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 80 °C (176 °F), is within that maximum. | |
| Prusament PETG Magnetite | — | Nozzle temperature is not in our current sources. | |
| Prusament PETG Tungsten | — | Nozzle temperature is not in our current sources. | |
| Prusament PETG V0 | — | Nozzle temperature is not in our current sources. | |
| Siraya Tech Fibreheart PETG-CF Pro | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| SUNLU Glow PETG | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| SUNLU High Speed Matte PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU High Speed PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU Luminous Glow In The Dark PETG | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| SUNLU Matte PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| SUNLU PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU PETG 2.0 | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU PETG Carbon Fiber | — | Nozzle temperature is not in our current sources. | |
| SUNLU PETG Glow In The Dark Filament | — | Nozzle temperature is not in our current sources. | |
| 3D Fuel Pro PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Printing Canada Budget PETG | — | Nozzle temperature is not in our current sources. | |
| 3DE Premium | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PETG Translucent | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE Easy Matte PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE easy PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE Glow PETG | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| 3DJAKE PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DO PETG | — | Nozzle temperature is not in our current sources. | |
| 3DPower Basic PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Hyper Speed PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Select PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PETG 3DXStat EMI | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PETG 3DXStat ESD | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Add-North ESD PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North Matte PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PETG Economy | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PETG Flame Retardant V0 | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PETG Koltron G1 | — | Bed temperature is not in our current sources. | |
| Add-North PETG PRO Matte | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PETG Rigid X | — | Nozzle temperature is not in our current sources. | |
| Add-North rPETG Matte | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PETG Hyper | — | Nozzle temperature is not in our current sources. | |
| Alzament PETG-CF | — | Nozzle temperature is not in our current sources. | |
| Ambrosia PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ATARAXIA ART PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| AURAPOL ARMY PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm PETG | — | Nozzle temperature is not in our current sources. | |
| Buddy3D PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D Glow PETG | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| CC3D PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| CHCKX PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dancyn 3D Prints PETG HF | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Das Filament PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design Galaxy PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel Digilab PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EasyPrint PETG | — | Nozzle temperature is not in our current sources. | |
| EconoFil PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EconoFil PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Eolas Prints PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX High Speed PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Easy PET-G | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy Easy PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Matt PET G Matte PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy PET-G | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy PET-G ESD | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy PET-G V0 PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Fiberlogy Refill Easy PET-G | — | Nozzle temperature is not in our current sources. | |
| Fiberon PETG-ESD | — | Nozzle temperature is not in our current sources. | |
| Fiberon PETG-rCF08 | — | Nozzle temperature is not in our current sources. | |
| FilamentPM ESD PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| FilamentPM Silk PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentree PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentree PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Filamentworld Metallic Silk PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentworld PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filkemp PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE Chameleon PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE High Speed PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE Metallic Rapid Silk PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| FLASHFORGE Rapid PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE Silk PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Bulk PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura CarbonFil | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| FormFutura CarbonFil CF03 | — | Nozzle temperature is not in our current sources. | |
| FormFutura EasyFil ePETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Hdglass | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura PETG CarbonFil | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| FormFutura PETG Hdglass | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Premium PETG Flame Retardant | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ReFill PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Geeetech PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| GST3D PETG | — | Nozzle temperature is not in our current sources. | |
| GST3D PETG translucent | — | Nozzle temperature is not in our current sources. | |
| GST3D PETG-CF | — | Nozzle temperature is not in our current sources. | |
| iBOSS 3D Light Gray | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IC3D PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IC3D PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| IC3D Recycled Matte PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-PETG | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| IEMAI PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Insignia PETG | — | Nozzle temperature is not in our current sources. | |
| Inslogic PETG CF10 | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Inslogic PETG Pro | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iSangHu High Speed Translucent PETG | — | Nozzle temperature is not in our current sources. | |
| iSANMATE PETG Clear Glitter | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iSANMATE pink | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kimya PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil PETG Rainbow "Dark Green Ocean" | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil PETG Rainbow "Dark Purple Galaxy" | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| L3D PETG | — | Nozzle temperature is not in our current sources. | |
| Matter3D Inc Matte PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Matter3D Inc PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Matter3D Inc PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| MatterHackers PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nebula PETG Art Chameleon | — | Nozzle temperature is not in our current sources. | |
| Nebula PETG Premium | — | Nozzle temperature is not in our current sources. | |
| Nobufil Glow PETG | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Nobufil Matte PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Paramount 3D PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Patron EG PETG HS | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PolyLite PETG | — | Nozzle temperature is not in our current sources. | |
| PolyLite Translucent PETG | — | Nozzle temperature is not in our current sources. | |
| PrimaCreator Easyprint PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primaselect PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primavalue PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaSelect PETG CARBON | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect Solid PETG | — | Nozzle temperature is not in our current sources. | |
| Print With Smile Bicolor Metallic PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Print With Smile PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Print With Smile PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Print With Smile RE PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Jessie Premium PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Professional LAB PETG | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PETG Matte | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB PETG Transparent | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PETG-CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Prografen PETG Graphene Light | — | Nozzle temperature is not in our current sources. | |
| Prografen PETG Graphene Strong | — | Nozzle temperature is not in our current sources. | |
| Proteor Print PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Push Plastic PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Push Plastic PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| QIDI Tech PETG Basic | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PETG Rapido | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PETG Translucent | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PETG-CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| QIDI Tech PETG-GF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| QIDI Tech PETG-Tough | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus PET G Hf High Speed PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| RecyclingFabrik PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Renkforce PETG | — | Bed temperature is not in our current sources. | |
| ROSA3D Filaments High Speed Glow PETG | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| ROSA3D Filaments High Speed PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Matte PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| ROSA3D Filaments Pet G Galaxy Hs PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Pet G Hs PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Pet G Structure Hs PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments PET-G MDT | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments PET-G Standard Neon Green Glow in the Dark | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| ROSA3D Filaments PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| SainSmart Glossy Gt 3 Silk High Speed PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Glow PETG | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| SainSmart PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| SainSmart Silk PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Slic3D PETG Basic | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| SmartPrint PETG | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PETG Transparent | — | Nozzle temperature is not in our current sources. | |
| Snapmaker PETG | — | Nozzle temperature is not in our current sources. | |
| Snapmaker PETG HF | — | Nozzle temperature is not in our current sources. | |
| Spectrum Glow PETG | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Spectrum PET G Matt Matte PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PET-G FR V0 PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PET-G Glitter PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PET-G Premium PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PETG Carbon | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Spectrum PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Spectrum PETG FR V0 | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PETG FX120 | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PETG Glitter | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PETG Glow in the Dark | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Spectrum PETG HT100 | Outside limits | The listed bed temperature starts at 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot print this material at the recommended bed temperature. | |
| Spectrum PETG MATT | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PETG Premium | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PETG Premium High Speed | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PTFE | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum R PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TECBEARS Glow PETG | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| TECBEARS PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D Aura PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone PETG | Partial | The listed bed range reaches 100 °C (212 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 60 °C (140 °F), is within that maximum. | |
| The Filament PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament PETG CF | — | Nozzle temperature is not in our current sources. | |
| The Filament PETG Lite | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY Frosted GF PETG | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| TINMORRY Galaxy PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY Glow PETG | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| TINMORRY Marble PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY Metallic PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| TINMORRY Rapid-Eco PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Verbatim PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Voxel PLA PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle PETG CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| XZN PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech PETG | Fits | Kobra 3 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Anycubic Kobra 3 Max against 295 PETG products: 185 fit, 2 cannot reach the full recommended range, 1 cannot print this material at a recommended temperature, and 107 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare