Bambu Lab A1 mini
Bambu Lab A1 mini against 158 ABS products: 0 fit, 7 cannot reach the full recommended range, 121 cannot print this material at a recommended temperature, and 30 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ABS | — | Nozzle temperature is not in our current sources. | |
| Bambu Lab ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Bambu Lab ABS-GF | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Creality ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Creality Hyper ABS | — | Whether an enclosure is required is not in our current sources. | |
| ELEGOO ABS | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Eryone ABS-GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Eryone ABS-PC | — | Nozzle temperature is not in our current sources. | |
| Eryone ABS+ | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ABS+ | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| eSUN 3D ABS+CF | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| eSUN 3D ABS+HS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| extrudr DuraPro ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Hatchbox ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Hatchbox Glow ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Inland ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Inland Glow ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Kingroon ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Overture ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Overture ABS Basic | — | Nozzle temperature is not in our current sources. | |
| Overture Glow ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Polymaker ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Polymaker Metallic Polylite Silk ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Polymaker Polylite ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Polymaker Silk ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Siraya Tech Fibreheart ABS HT HF | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Siraya Tech Fibreheart ABS-CF Core | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Siraya Tech Fibreheart ABS-GF | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| SUNLU ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| SUNLU ABS-FR | — | Nozzle temperature is not in our current sources. | |
| SUNLU High Speed ABS | — | Nozzle temperature is not in our current sources. | |
| SUNLU PC-ABS | — | Nozzle temperature is not in our current sources. | |
| 3D Fuel Pro ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| 3DE Pirate Black | — | Whether an enclosure is required is not in our current sources. | |
| 3DEA ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| 3DJAKE ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| 3DPower ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| 3DXTech ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| 3DXTech ABS 3DXMax | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| 3DXTech ABS 3DXStat ESD | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| 3DXTech ABS 3DXTech | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| 3DXTech ABS CF | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| 3DXTech ABS GF | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Add-North ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Add-North rABS | Outside limits | The listed bed temperature starts at 105 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Alzament ABS | — | Nozzle temperature is not in our current sources. | |
| Ambrosia ABS Matte | Partial | The listed bed range reaches 115 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 75 °C, is within that maximum. | |
| Ambrosia Über ABS | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 75 °C, is within that maximum. | |
| Atomic Filament ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Atomic Filament ABS CF | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| AURAPOL ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| AzureFilm ABS Plus | Outside limits | The listed bed temperature starts at 110 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| AzureFilm ABS Prime | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Buddy3D ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Buddy3D Matte ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| CC3D ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| COEX 3D ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Cookiecad ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Devil Design ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Eolas Prints ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Fiberlogy ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Fiberlogy ABS ESD | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy ABS PLUS | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy EASY ABS | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy R ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Fiberlogy Refill ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Fiberlogy Refill R ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| FilamentPM ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Filamentworld ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Filatech ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| FLASHFORGE ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| FLASHFORGE D Series ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| FormFutura ABSpro | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| FormFutura ABSpro Flame Retardant | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| FormFutura EasyFil ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| FormFutura EasyFil ABS - Glow in the Dark | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| FormFutura Premium ABS Medical | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| FormFutura ReForm - rTitan | Partial | The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| FormFutura TitanX | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Francofil ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Geeetech ABS+ | Outside limits | The listed bed temperature starts at 95 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Geeetech Upgrade ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Gizmo Dorks ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Gizmo Dorks ABS CF | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Gizmo Dorks Color Change ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Gizmo Dorks Fluorescent ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Gizmo Dorks Glow ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Gizmo Dorks Low Odor ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Gizmo Dorks Thermochromic ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| GST3D ABS | — | Nozzle temperature is not in our current sources. | |
| IC3D ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| IEMAI ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| IEMAI CF-ABS | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| IEMAI ESD-ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Inslogic ABS FR V0 | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Inslogic ABS GF10 | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| kexcelled The K5 ABS T | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| LDO ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| MatterHackers ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Mosaic ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Nebula ABS Art Glowing | — | Nozzle temperature is not in our current sources. | |
| Nebula ABS Art Marble Gray | — | Nozzle temperature is not in our current sources. | |
| Nebula ABS Art Thermo | — | Nozzle temperature is not in our current sources. | |
| Nebula ABS Tech 702 | — | Nozzle temperature is not in our current sources. | |
| Nobufil ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Nobufil Glow ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Nobufil X Astro ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Nobufil X Candy ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Nobufil X Industrial ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Nobufil X Matt Matte ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Nobufil X Neon ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Paramount 3D ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Paramount 3D ABS CF | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| PolyLite ABS | — | Nozzle temperature is not in our current sources. | |
| PolyLite Galaxy ABS | — | Nozzle temperature is not in our current sources. | |
| PolyLite Metallic ABS | — | Nozzle temperature is not in our current sources. | |
| PolyLite Neon ABS | — | Nozzle temperature is not in our current sources. | |
| PrimaCreator ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| PrimaCreator Glow ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| PrimaCreator Primaselect ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| PrimaCreator Primaselect Glow ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| PrimaCreator Primavalue ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| PrimaSelect ABS | — | Nozzle temperature is not in our current sources. | |
| PrimaValue ABS | — | Nozzle temperature is not in our current sources. | |
| Print With Smile ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| PrintedSolid ABS CF | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Professional LAB ABS | — | Nozzle temperature is not in our current sources. | |
| Push Plastic ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Push Plastic CF ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Push Plastic Matte ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| QIDI Tech ABS Metal Rapido | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| QIDI Tech ABS Rapido | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| QIDI Tech ABS-GF25 | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| QIDI Tech Odorless ABS Rapido | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| ROSA3D Filaments ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| ROSA3D Filaments ABS V0 FR | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| ROSA3D Filaments Matte ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| SainSmart ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Sakata 3D ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| SMART MATERIALS 3D ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| SmartPrint ABS | — | Nozzle temperature is not in our current sources. | |
| Snapmaker ABS | — | Nozzle temperature is not in our current sources. | |
| SOVB 3D Fil ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| SOVB 3D Glow ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Spectrum ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Spectrum ABS FR V0 | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Spectrum ABS GP450 | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Spectrum ABS Kevlar | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Spectrum ABS Medical | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Spectrum smart ABS | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Tectonic 3D Aura ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| TEQStone ABS | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| TINMORRY ABS Pro | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Verbatim ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. | |
| Winkle ABS | Outside limits | The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab A1 mini against 158 ABS products: 0 fit, 7 cannot reach the full recommended range, 121 cannot print this material at a recommended temperature, and 30 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare