Fits
ELEGOO PLA Translucent on the A1 mini
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle210–230 °C (410–446 °F)
- Bed35–65 °C (95–149 °F)
- Speedup to 200 mm/s
- Dry55 °C (131 °F) for 8 h
- Density1.24 g/cm³
Print at 210–230 °C (410–446 °F) nozzle, 35–65 °C (95–149 °F) bed. Dry 8 h at 55 °C (131 °F) if it's been open. Listed speed up to 200 mm/s.
A1 mini maximums: nozzle 300 °C (572 °F), bed 80 °C (176 °F).
Sources & notes
Bambu Lab A1 mini with ELEGOO PLA Translucent: A1 mini can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 15 October 2026. Manufacturer page checked 14 October 2026.
ELEGOO PLA Translucent US product page · checked 15 October 2026 · Printer source · Filament JSON
Bambu Lab lists a 300 °C maximum hot end temperature, an 80 °C maximum build plate temperature, and a stainless steel nozzle.
The FAQ says a hardened steel nozzle is required for carbon-fiber or glass-fiber filament and is not the pre-installed nozzle.
Enclosure is not stated on the specification table checked here.
Questions
Can the Bambu Lab A1 mini reach the listed PLA Translucent nozzle temperature?
The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F).
Can the A1 mini reach the listed bed temperature?
The listed bed maximum of 65 °C (149 °F) is within this printer's maximum of 80 °C (176 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.