Eryone PLA+ on the A1 mini
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed—
- Speed—
- Dry75 °C maximum
- Density1.23 g/cm³
No nozzle or bed temperature on the source. Dry at 75 °C if it's been open. No drying time on the source.
A1 mini maximums: nozzle 300 °C, bed 80 °C.
Sources & notes
Bambu Lab A1 mini with Eryone PLA+: Nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Bambu Lab lists a 300 °C maximum hot end temperature, an 80 °C maximum build plate temperature, and a stainless steel nozzle.
The FAQ says a hardened steel nozzle is required for carbon-fiber or glass-fiber filament and is not the pre-installed nozzle.
Enclosure is not stated on the specification table checked here.
Questions
Can the Bambu Lab A1 mini reach the listed PLA+ nozzle temperature?
Nozzle temperature is not in our current sources.
Can the A1 mini reach the listed bed temperature?
Bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.