Outside limits
Overture Glow ABS on the A1
As an Amazon Associate we earn from qualifying purchases.
A1 cannot reach the listed nozzle temperature.
- Nozzle230–260 °C
- Bed90–110 °C
- Speed—
- Dry—
- Density1.04 g/cm³
A1 maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Bambu Lab A1 with Overture Glow ABS: The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Filament source · Printer source · Filament JSON
The A1 FAQ states a maximum hotend temperature of 300 °C and a maximum heatbed temperature of 100 °C.
The same FAQ says the printer is pre-installed with a 0.4 mm stainless steel nozzle. Hardened steel nozzles are sold separately.
The FAQ does not call the frame open or enclosed, so enclosure is left empty.
Questions
Can the Bambu Lab A1 reach the listed Glow ABS nozzle temperature?
The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C.
Can the A1 reach the listed bed temperature?
The listed bed range reaches 110 °C, above this printer's maximum of 100 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.